Engineered Systems
Engineered Systems
Full System Integration, From Concept to Start-Up
Flow Dynamics and Automation is one of the best-equipped systems integrators in the country. We take an idea from concept completely through installation and start-up — with a schematic drawing for every build, a 3D model of the layout when the project calls for it, and a quality checklist that verifies each power unit matches that drawing in every detail.
Every build gets a schematic drawing, and a 3D layout model when the project calls for it — reviewed for fit and clearance before anything is fabricated.
Custom Solutions
Attention to Detail, Start to Finish
Every system we design requires a schematic drawing so you know exactly what you're getting and what the system will do. For layouts with tighter space or clearance requirements, we'll also put together a 3D model so you can see how the unit fits before it's built. Our quality checklist confirms the finished power unit matches that drawing in every detail, and that the system is completely clean before it ships.
System Build: FDA‑H004829- Schematic drawing provided before build begins
- 3D layout model generated when the project calls for it
- Quality checklist verifies unit matches drawing in every detail
- Full clean-down inspection prior to shipment
Quality Verified
- Matches Schematic
- Pressure Tested
- Cleaned & Ready
Every unit is checked against its schematic and cleaned down before it leaves our shop, so what arrives on your dock matches what you approved.
Engineered Systems Capabilities
Systems, Power Units, Engineering & CPR
Select a discipline below for scope of work and where our engineering group can plug into your project.
Systems Integration
Flow Dynamics and Automation, Inc. is one of the best-equipped companies in the country to provide full system integration — from conception completely through installation and start-up.
Design Process
- Every system requires a schematic drawing before build so you know exactly what you'll get.
- For layouts that need it, we'll also generate a 3D model so the fit and clearances can be reviewed before build.
- A quality checklist confirms the finished power unit matches that drawing in every detail.
Build & Delivery
- Every unit is inspected clean prior to shipment.
Built For
Hydraulic Power Unit Engineering
Our systems division carries a project from circuit design through a finished, tested power unit — sized and built around the way your application will actually run, not a catalog default.
What's Included
- Custom circuit design built around your pressure, flow, and duty-cycle requirements
- HPU design and manufacturing, from reservoir and manifold layout to final assembly
- Electrical control design and panel build to run and protect the unit
- In-shop testing and verification before anything leaves our facility
Typical Builds
- Mobile and industrial power units, maintenance HPUs, and dedicated test stands
- Accumulator storage systems and automated lubrication units
Power Unit Scope
Engineering and Application Assistance
We maintain a fully staffed quality engineering department to assist you with your application — from technical questions through job coordination and troubleshooting.
What We Support
- Programming and motion control
- PLC sales & service
- Electrical panels and components
- Servo and proportional valves
- Electric linear actuators
- Job coordination and troubleshooting
Engineering Focus
CPR: Controls, Panels, Retrofits
Breathe life into your old machine. If your equipment's structural frame is sound but it needs new brains, better electrical, or added functionality, talk to us before you buy a new machine — you can do CPR on your old one for much, much less.
Controls
- Complete functionality upgrades with PLCs, motion controllers, and touch screens for increased productivity, higher accuracy, self-diagnostics, and improved reliability — across hydraulics and electric linear and rotary drives.
Panels
- Quality, well-built electrical panels using our standard components or the specific brand you request.
Retrofits
- Structural modification and custom-made parts when your upgrade needs more than electrical work alone.
Request a Quote
Tell Us About Your Project
Fill out the form below and a Flow Dynamics engineer will follow up with next steps.
Why Flow Dynamics & Automation
Engineering at Every Stage
Our engineering department stays involved from the first schematic through final start-up — so every project gets the same level of attention whether it's a new build or a retrofit on equipment you already own.
Design Engineering
Every project starts with a schematic drawing and, when the layout calls for it, a 3D model — sized and specified around your application instead of a catalog default.
Build Engineering
Power units, manifolds, and electrical panels are fabricated in-house and checked against the drawing at every stage, with a quality checklist confirming the finished unit matches the plan.
Integration Engineering
From installation and start-up to controls, PLC programming, and CPR retrofits on existing equipment, our engineers can stay on the project through commissioning — not just delivery.
Ready to Start Your Next Project?
Send us your idea, spec, or aging machine and we'll get back to you with next steps — design, timeline, and pricing.